Serial Port Module Waterproof Transceiver Integrated Distance Measurement Module Can Be Used with Wired Sensor

• Customization: Available
• Type: Waterproof Ultrasonic Sensor
• Output Signal Type: Digital Type
• Model NO.: AJ-SR04M
• Production Process: Integration
• Sensitivity: High
• Probe Type: Lamb Wave Probe
• Measuring Medium: Gas
• Detection mode: Direct Reflection Type
• IP Rating: IP67
• Certification: CE/FCC/RoHS
• Customized: Customized
• Working Voltage: 5V
• Working Current: Less Than or Equal to 20mA
• Maximum Detection Distance: 5m
• Substrate Marker: 30*30cm Cardboard
• X-Axis Angle: 50ºC Positive and Negative 15ºC
• Y-Axis Angle: 50ºC Positive and Negative 15ºC
• Interface Communication Protocol: Serial Port
• Transport Package: Customization
• Specification: Customization
• Trademark: Customization
• Origin: China
• HS Code: 9015100000
• Production Capacity: Max. 20K Daily
• Package Size: 40.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 5.000kg

Product Description

(Support bulk orders and Custom service orders )
We offer all kinds of Electronic Components ( High frequency sensor ,  Wire harness sensor , Ultrasonic sensor ,Module , Parking sensor, Tire pressure monitor,  Etc.) with a wide range, Good quality, Factory prices and Stylish designs according to your need.
 

Product Description

Product features
1. Small size, easy to use;
2. High measurement accuracy, maximum resolution 3mm accuracy;
3. Strong anti-interference;

Product application occasions
1. Intelligent car distance measurement, obstacle avoidance
2. Object distance measurement, human height measurement
3. Intelligent traffic control, parking space control
4. Teaching and research, security, industrial control
5. Artificial intelligence, aircraft height measurement, etc.

Electrical performance parameters

Item No.	Item	Parameter	Testing Instrument	Testing Conditions
1	Operating Voltage (V)	5V	Multimeter	25°C normal temperature environment
2	Operating Current (mA)	≤20mA	Multimeter	25°C normal temperature environment
3	Operating Frequency (KHz)	40KHz	Impedance Analyzer	25°C normal temperature environment
4	Output Mode	Serial Port	-	-
5	X - axis Direction Angle (°)	50±15	KT Ranging Sub - board	25°C normal temperature environment
6	Y - axis Direction Angle (°)	50±15	KT Ranging Sub - board	25°C normal temperature environment
7	Distance (m)	5	KT Ranging Sub - board	Smooth wall surface
8	Operating Temperature (°C)	-10 - 75°C	-	-
9	Storage Temperature (°C)	-40 - 80°C	-	-
10	Resolution (mm)	3mm	KT Ranging Sub - board	30*30cm cardboard
-	-	-	-	The above data are all tested in a 25°C environment.

Notes:
To prevent sensor failure, operational failure or deterioration of its characteristics, do not use the sensor in the following or similar situations:
1) Strong shock or vibration;
2) Long-term exposure to high temperature and high humidity; In corrosive gas or sea breeze;
3) In an environment with dissolved organic matter;
4) In a dusty environment;
5) Exceeding the allowable input voltage;
6) To prevent additional stress on the leads, do not apply external force to the leads that have just been soldered. If it is necessary to do so, clamp the root of the lead first.
7) Since ultrasonic sensors are directional, be sure to pay attention to their installation position. It is recommended that the installation position is perpendicular to the object being measured.
8) To ensure reliability and service life, do not use or store above the rated temperature.
9) Do not use the sensor in a vacuum area or explosion-proof area.
10) Do not use it in an environment where the atmosphere is uneven and a temperature gradient is generated, which will cause measurement errors.
11) The product must not be used in an environment with dissolved organic matter or stored in corrosive gases, especially hydrogen chloride gas, hydrogen sulfide gas, acid, alkali, salt or similar. The products stored in the warehouse should pay attention to normal temperature and humidity. During storage, please pay attention to moisture-proof and prevent pin oxidation. Sudden changes in temperature and humidity may cause product performance failure or malfunction.
12) If applied to special conditions such as non-standard frequency, please inform our company of the specific working conditions, circuits, etc. you need, so that we can design and manufacture sensor products that meet your specific usage requirements.
13) If there is a problem with the use of our products, please contact the relevant staff of our company in time. If the appearance of the sensor is not damaged, our company can replace the product.
14) The sensor must not be disassembled without authorization. If the performance and appearance are poor due to unauthorized disassembly, our company will not be responsible.
15) In order to prevent accidents caused by work failure, anti-failure function should be added during secondary development.
16) If you want to add a shell to this product, you need to use a cushion material between the shell and the sensor as an improvement measure. At the same time, the sensor should not be subject to strong mechanical vibration when in use, and the working environment should not have strong electromagnetic interference.
 

Detailed Photos

 

Company Profile

 

FAQ

 

FAQ

Q:What are the advantages of factory?
A:its own factory, has independent research and development and independent production capacity.      
Products using high-end chips, with high quality, high stability products to customers.

Q:Can we order many different parts and make combine shipment?
A:We can combine many items,and deliver by courier/sealland/air etc.pack well.

Q:How can I make our own brand for my order?
A:If the order quantity meets the requirements, we provide customized service

Q:What is the delivery if I make payment?
A:We will ship the products in stock within 1-3 business days.
Products that need to be produced will be produced and shipped within 7-15 business days.

Q:Can we visit your factory or office?
A:We always welcome customer visit us, let me know the schedule, we will arrange.