Automobile Parts Sensors Tire Pressure Monitor Security Alarm Universal Sensor Pressure TPMS for Car Truck RV

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: KT-TPMS03-L
• Testing Equipment Type: Car Fault Detector
• Update Method: Update New Products
• Condition: New
• Standard: Standard
• Display Stand-by Current: Less Than 70ua
• Display Pressure Unit: Bar/Psi
• Display Size: 94X61X29mm
• Display Working Voltage: DC4.5V-6V
• Sensor Stand-by Current: Less Than or Equal to 0.7ua
• Pressure Range: 0-800 Kpa
• Waterproof Lever: IP67
• Frequency: 433.92MHz
• Power Supply: DC12-36V
• Tx Power: Less Than 8dBm
• Transport Package: Customization
• Specification: Customization
• Trademark: Customization
• Origin: China
• HS Code: 90262090
• Production Capacity: 10K Weekly
• Package Size: 40.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 5.000kg

Product Description

 

Welcome to ShenZhen Kangtong Technology

We offer all kinds of Electronic Components ( High frequency sensor ,  Wire harness sensor , Ultrasonic sensor ,Module , Parking sensor, Tire pressure monitor,  Etc.) with a wide range, Good quality, Factory prices and Stylish designs according to your need

(Support bulk orders and Custom service orders )
 

Function

Ensure driving safety

Prevent tire blowout accidents: Too high or too low tire pressure may cause a tire blowout. When the tire pressure is too high, the contact area between the tire and the ground is reduced, and the pressure per unit area increases, which can easily cause the wear of the middle part of the tread to intensify. During driving, especially when driving at high speed, the internal air pressure increases further due to the increase in tire temperature, which can easily cause a tire blowout. When the air pressure is too low, the side of the tire is prone to excessive deformation, generating a lot of heat, causing accelerated rubber aging and cord fatigue, which also increases the risk of tire blowout. TPMS can monitor tire pressure in real time. When the air pressure exceeds the normal range, it will promptly remind the driver to effectively reduce the possibility of tire blowout.
Improve vehicle handling stability: Normal tire pressure is one of the key factors to ensure vehicle handling. Insufficient air pressure will make the vehicle steering heavy and difficult to control. During emergency braking or avoidance, the vehicle cannot drive accurately according to the driver's intention, which can easily cause traffic accidents. TPMS helps to keep the tire pressure in a suitable state, thereby ensuring the stability and accuracy of vehicle handling.
Extend tire service life
Balanced wear: Normal tire pressure can ensure uniform contact between the tire and the ground. If the air pressure is abnormal, the tire will wear out too quickly in some parts. For example, too high air pressure will aggravate the wear of the center of the tread, and too low air pressure will cause serious wear of the shoulder. TPMS can monitor and remind the tire pressure, so that the driver can adjust the air pressure in time, make the tire wear more evenly, and extend the service life of the tire.
Reduce abnormal tire damage: Abnormal air pressure may also cause other forms of tire damage, such as cord breakage and delamination. Through the effective monitoring of tire pressure by TPMS, these abnormal damages caused by air pressure problems can be avoided, and the tire can be further protected.
Reduce fuel consumption
Optimize driving resistance: When the tire pressure is insufficient, the rolling friction between the tire and the ground will increase. According to relevant research, when the tire pressure is reduced by 30%, the fuel consumption will increase by about 10%. TPMS can ensure that the tire pressure is at an appropriate level, reduce rolling resistance, thereby reducing fuel consumption during vehicle driving and improving fuel economy.

 

Product Description

 

1,Description:
1-1, Colourful display design;
1-2, wireless comminucation with sensors;
1-3, Without any limitation of sensor programming;
1-4,  Available for different hard enviroment. Such as high speed, High and low temperature, Humidity, acid and alkali, and salt fog ect
1-5, Solar panel for battery charging;
1-6, Customization incuded original car maker transmittion ( CAN protocol).
3, Product photos:
Package list
Item	Part Name	Description		Quantity	Remark
1	Display	Colourful with high resolution LCD		1	standard
2	Sensor	inner installation		6	standard
3	Charging cable	USB standard connect		1	standard
4	3M stick			1	standard
5	Warning label	Waring label stick on air cock of tyre		6	standard or customization
6	Manual	Installation manual		1	standard or customization

4, Competitive advantage:

4.1, High quality control based on IATF16949 system;

4.2, 100% function testing before shipping, 

4.3, 100% aging testing for 4 hours;

4.4, 100% waterproof testing based IP68/1meter water pressure;

4.5, 100% thermostability battery for both display and sensors;

4.6, ERP system for material controlling;

4.7, Solar panel for display charging;

4.8, Sensor lab for best quality;

4.9, Capability for completed product included ID, MD, hardware and software for  Can protocol.

Kangtong has been building Lab to verify our developing and offer high quality ultrasonic product to our customers. Kangtong had passed auditing for IATF16949 by German Dekra in 2018 and we are remaining on the quality process For production running.

Company Profile

FAQ

FAQ

1.When can we get the reply? 
Any inquiries will be replied within 24 hours. 
Our Kongtong sales team will try our best to support you. 

2.What about minimum order quantity?
We have no limit for MOQ,so you can even buy only 1 piece.
Welcome to buy sample to test first. 

3.Do you have different Parking Sensor series ?
A: Yes,We have ,you can check my shop or send Email to me 

4.Can customize,modify and develop products according to the design drawing?Yes,wprovide OEM service and can customize products according to the drawing.

5.How will you control product quality?
We strictly control every detail of production, and every product is inspected by our QC team before delivery. Moreover,our production is abided by IATF16949, CE .

6.What about delivery time?
Sample, We will send to you within 3 days after payment received. Production for big quantity needs 3 to 10days. Andit also depends on product and quantity.
If want to know the exact time. Email us the quantity,
We will check the time for you.

7.What about terms of payment?
Payment terms: T/T,  west Union , Paypal and L/C etc.

8.How do I know that you have sent the products out?
Once the products are sent out, a tracking number will be provided so that you can check where your goods at all times

9.How you will send the goods to us?
We will send the goods to you by DHL,FEDEX,UPS, EMS,AIR etc. Or Shipping Methods as you request