40kHz 16X12mm Waterproof Sealed Ultrasonic Sensor with Wire

• Customization: Available
• Type: Waterproof Ultrasonic Sensor
• Output Signal Type: Ultrasonic Sensor
• Model NO.: KT40-1623
• Production Process: Aluminum Alloy
• Sensitivity: Medium
• Probe Type: Angle Probe
• Measuring Medium: Gas
• Detection mode: Ultrasonic Sensor
• IP Rating: IP67
• Certification: CE/FCC/RoHS
• Customized: Customized
• Ringing Time: Less Than or Equal to 1.8ms
• Center Frequency: 40 Plus or Minus 1.5kHz
• Function: Tx-Rx Dual-Use
• Capacitance: 1800 Plus or Minus 15% PF
• Max. Input Voltag: 140vp-P
• Material: Aluminum
• Operating Temp: -40 to +85 Celsius
• Storage Temp: -40 to +85 Celsius
• Dimension: 16*12mm
• Terminal: Red and Black Terminal Wire
• Color: Aluminum(Color)
• Transport Package: Customization
• Specification: Customization
• Trademark: Customization
• Origin: China
• HS Code: 9018129900
• Production Capacity: Max20K Daily
• Package Size: 40.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 3.000kg

Product Description

To prevent sensor failure, operational failure or deterioration of its characteristics, do not use the sensor in the following or similar situations:
1) Strong shock or vibration;
2) Long-term exposure to high temperature and high humidity; In corrosive gas or sea breeze;
3) In an environment with dissolved organic matter;
4) In a dusty environment;
5) Exceeding the allowable input voltage;
6) To prevent additional stress on the leads, do not apply external force to the leads that have just been soldered. If it is necessary to do so, first clamp the root of the lead.
7) Since ultrasonic sensors are directional, be sure to pay attention to their installation position. It is recommended that the installation position is perpendicular to the object being measured.
8) To ensure reliability and service life, do not use or store above the rated temperature.
9) Do not use the sensor in a vacuum area or explosion-proof area.
10) Do not use it in an environment where the atmosphere is uneven and a temperature gradient is generated, which will cause measurement errors.
11) The product must not be used in an environment with dissolved organic matter or stored in corrosive gases, especially hydrogen chloride gas, hydrogen sulfide gas, acid, alkali, salt or similar. Products stored in the warehouse should pay attention to normal temperature and humidity. During storage, please pay attention to moisture-proof and prevent pin oxidation. Sudden changes in temperature and humidity may cause product performance failure or malfunction.
12) If applied to special conditions such as non-standard frequency, please inform our company of the specific working conditions, circuits, etc. you need, so that we can design and manufacture sensor products that meet your specific usage requirements.
13) If there is a problem with the use of our products, please contact the relevant staff of our company in time. If the appearance of the sensor is not damaged, our company can replace the product.
14) The sensor must not be disassembled without authorization. If the performance and appearance are poor due to unauthorized disassembly, our company will not be responsible.
15) In order to prevent accidents caused by work failure, anti-failure function should be added during secondary development.
16) If you want to add a shell to this product, you need to use a cushion material between the shell and the sensor as an improvement measure. At the same time, the sensor should not be subject to strong mechanical vibration when in use, and the working environment should not have strong electromagnetic interference.

Product Description

 

Item	Description	Parameters
1	Function	Tx-Rx Dual-Use
2	Center frequency	40±1.5 KHz
3	Ringing time	≤1.8ms
4	Capacitance	1800±15% PF
5	Beam Angle	60±15º /60±15º
6	Max. Input Voltage	140Vp-p
7	Material	Aluminum
8	Operating Temp	-40~+85ºC
9	Storage Temp	-40~+85ºC
10	Dimension	16x12mm
11	Terminal	Red and black terminal wire JAM2.0
12	Color	Aluminum (color)

Detailed Photos

 

Company Profile

FAQ:

Q:How to guarantee my order and payment?
A:Comton has Secured Trade Service , 100% refundable if any quality or delivery problem.

Q:What are the advantages of Comton Smartwatches?
A:Comton owns its own factory, has independent research and development and independent production capacity.
Products using high-end chips, with high quality, high stability products to customers.

Q:Can we order many different auto parts and make combine shipment?
A:We can combine many items,and deliver by courier/sealland/air etc.pack well.

Q:How can I make our own brand for my order?
A:If the order quantity meets the requirements, we provide customized service

Q:What is the delivery if I make payment?
A:We will ship the products in stock within 1-3 business days.

Products that need to be produced will be produced and shipped within 7-15 business days.

Q:Can we visit your factory or office
A:We always welcome customer visit us, let me know the schedule, we will arrange.