| Customization: | Available |
|---|---|
| Type: | Waterproof Ultrasonic Sensor |
| Output Signal Type: | Ultrasound |
|
Still deciding? Get samples of US$ 3/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1, Part Description: | ||||||
| 1 | Independent RX and TX | |||||
| 2 | Water proof | |||||
| 3 | extension wire harness (Dia 3.0mm x 200mmL) | |||||
| 4 | 2P connect with capsule. Left for positive and right for negative with copper Pin | |||||
| 2, Electronic specification & physical character | ||||||
| Description | Standard or testing result | Item | Description | Standard or testing result | ||
| 1 | Part Number | KT40-M087 | 8 | Detective angle | 70°±15° | |
| 2 | Match sensor number | KT40-1412 | 9 | Intermittent space (ms) | 70 | |
| 3 | Center frequency(KHz) | 40±1KHz | 10 | Protocal | TTL | |
| 4 | Operation voltage | 5V | 11 | Connect | 2.54 DuPont needle 4P | |
| 5 | Operation current | 25mA | 12 | Sensor colour | Natural aluminum or customization | |
| 6 | Detective distance (Max.) |
2m | 13 | Stock temperature | -30ºC~+70ºC | |
| 7 | Blind detective distance | 5cm±1cm | 14 | Operation temperature | -10ºC~+60ºC | |
| 3,Dimension and detective diagram | ||||||
| 4. Environmental test |
| No. |
| 1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 |
| 7 |
| 8 |
| 9 |
| 10 |
| 5.Test conditions and instruments |
| No. |
| 1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 |
| 7 |
| 6.Precautions |
| 1. Please confirm with us which industry will be used before purchasing for selection. |
| 2. In order to prevent the sensor from failure, working failure or performance degradation, the anti failure function shall be added to the product design, and the product shall not be used under the following or similar conditions. (a) strong shock or vibration (b) prolonged exposure to high temperature and humidity; (c)In corrosive gas or sea breeze (d)Exposure to dissolved organic matter (e)Dusty environment; (f)Over allowable input voltage |
| 7.Quality assurance |
| The sensor defects due to the manufacturer during the warranty period of the product can be replaced free of charge. |
| The following situations are not covered by the warranty. |
| 1, improper use or handling by users. |
| 2, changed or repaired by the users. |
| 3,any other situation that does not belong to the responsibility of the manufacturer, such as natural disasters, accidents, etc. |
){kind=link}