1.Technical parameter
| 1, Part Description: |
| 1 |
Independent RX and TX |
| 2 |
Water proof |
| 3 |
Extension wire harness (Dia 3.0mm x 200mmL) |
| 4 |
2P connect with capsule. Left for positive and right for negative with copper Pin |
| |
|
|
|
|
|
|
| 2, Electronic specification & physical character |
| |
Description |
Standard or testing result |
|
Item |
Description |
Standard or testing result |
| 1 |
Part Number |
KT40-M087-2 |
8 |
Detective angle |
70°±15° |
| 2 |
Match sensor number |
KT40-1631B |
9 |
Intermittent space (ms) |
70 |
| 3 |
Center frequency(KHz) |
40±1KHz |
10 |
Protocal |
TTL |
| 4 |
Operation voltage |
5V |
11 |
Connect |
2.54 DuPont needle 4P |
| 5 |
Operation current |
25mA |
12 |
Sensor colour |
Neuter aluminum or customization |
| 6 |
Detective distance
(Max.) |
1m |
13 |
Stock temperature |
-30ºC~+70ºC |
| 7 |
Blind detective distance |
5cm±1cm |
14 |
Operation temperature |
-10ºC~+60ºC |
| |
| 3,Dimension and detective diagram |
2.Product picture and installation
The connector model is B04B-XNISK-A-1.
4.Interface definition
| NO. |
Interface |
Description |
| 1 |
Vcc |
Power supply |
| 2 |
Trig |
GPIO mode is Trig,triggering signals |
| 3 |
Echo |
GPIO mode is Echo,feedback signals |
| 4 |
Gnd |
Ground |
4. Environmental testNo.123456789105.
Test conditions and instrumentsNo.12345676.
Precautions1. Please confirm with us which industry will be used before purchasing for selection.2. In order to prevent the sensor from failure, working failure or performance degradation, the anti failure
function shall be added to the product design, and the product shall not be used under the following or
similar conditions.
(a) strong shock or vibration
(b) prolonged exposure to high temperature and humidity;
(c)In corrosive gas or sea breeze
(d)Exposure to dissolved organic matter
(e)Dusty environment;
(f)Over allowable input voltage7.
Quality assuranceThe sensor defects due to the manufacturer during the warranty period of the product can be replaced free of charge.The following situations are not covered by the warranty.1, improper use or handling by users. 2, changed or repaired by the users. 3,any other situation that does not belong to the responsibility of the manufacturer, such as natural disasters, accidents, etc.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}