25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor

Product Details
Customization: Available
Type: Open Ultrasonic Sensors
Output Signal Type: Ultrasonic
Still deciding? Get samples of US$ 0.46/Piece
Order Sample
Shipping & Policy
Shipping Cost: Contact the supplier about freight and estimated delivery time.
Payment Methods:
visa mastercard discover JCB diners club american express T/T
PIX SPEI OXXO PSE OZOW
  Support payments in USD
Secure payments: Every payment you make on Made-in-China.com is protected by the platform.
Refund policy: Claim a refund if your order doesn't ship, is missing, or arrives with product issues.
Secured Trading Service
Gold Member Since 2019

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Importers and Exporters
The supplier has import and export rights
Years of Export Experience
The export experience of the supplier is more than 10 years
Patents Awarded
The supplier had awarded 1 patents, you can check the Audit Report for more information
Standardized quality control
The supplier has a complete and standardized quality control process, check the Audit Report for more information
to see all verified strength labels (21)
  • 25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor
  • 25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor
  • 25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor
  • 25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor
  • 25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor
  • 25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor
Find Similar Products

Basic Info.

Model NO.
KT23-R1611
Production Process
Aluminum Alloy
Sensitivity
Medium
Probe Type
Angle Probe
Measuring Medium
Gas
Detection mode
Ultrasonic
IP Rating
None
Certification
RoHS
Customized
Customized
Function
Transmit
Center Frequency (kHz)
23positive or Negative1
Sensitivity (dB)
Greater Than or Equal to-68
Capacitance(PF)
2200positive or Negative25%
Beam Angle-6 dB Directivity
75positive or Negative10
Maximum Input Voltage (Vp -P)
100
Housing Material/Color
Aluminum Shell Color
Dimensions(mm)
φ16mm*12mm
Weight(G)
2.3G
Working Temperature(ºC)
-10~+60
Storage Temperature(ºC)
-40~+85
Transport Package
Customization
Specification
customization
Trademark
customization
Origin
China
HS Code
9018129900
Production Capacity
Max. 20K Daily

Packaging & Delivery

Package Size
40.00cm * 30.00cm * 30.00cm
Package Gross Weight
3.000kg

Product Description

1, Part Description:
1 Openning ultrasonic sensor
2 Optional housing material for both alnuminum or plastic
3 Optional for TX or RX
4 Pins to solder on PCBA
             
2, Electronic specification & physical character
Item Description Standard or testing result   Item Description Standard or testing result
1 Part Number KT23-R1611/R2411 8 Max. Input Voltage(Vp -p) 100V
2 Functional RX or TX  9 Sensor colour Natural aluminum or black plastic or customization
3 Center frequency(KHz) 23±1 10 Dimension (mm) Optional for diameter
16 or 24 
4 Sound Pressure Level
10Vrms/30cm(dB)
RX  none / TX ≥108 11 Weight (g) Min. 2.3 to Max. 6.3
5 Sensitivity (db) RX ≥-68  / TX none 12 Operation temperature -10ºC~+60ºC
6 Capacitance(PF) 2200±25% 13 Stock temperature -40ºC~+85ºC
7 Beam angle 75±10      
 
3,Dimension and detective diagram
25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor 25kHz Aluminum Shell Pin Type Single Angle Open Ultrasonic Sensor
4. Environmental test
No. Test items Test condition Standard
1 High temp storage test 144 hours at + 85 ºC After the test and place in + 25 ºC (room temp) for 24 hours, the sensitivity and residual vibration change shall not exceed 30% compared with the initial value 
2 Low temp storage test 144 hours at - 40 ºC
3 High temp and high humidity storage test 144 hours at + 65 ºC and 85 ± 5% RH
4 Thermal shock test Parallel 3.9k Ω resistor at both ends of the probe, keep the temp at - 40 ± 5 ºC for 0.5h, and increase the temp to 85 ± 5 ºC within 5 minutes and keep for 0.5h.100 cycles. After the test and place in + 25 ºC (room temp) for 24 hours, the sensitivity and residual vibration change shall not exceed 30% compared with the initial value 
5 Vibration test Products bear the vibration with frequency 10-55hz, amplitude 1.5mm,and sweep rate 1oct / min, from X, Y and Z directions for each 2 hours respectively After the test and place in + 25 ºC (room temp) for 4 hours, the sensitivity and residual vibration change shall not exceed 30% compared with the initial value 
6 Monomer drop test 15 free fall tests carried out from 100 ± 10cm height to 50mm thick wooden floor After the test and place in + 25 ºC (room temp) for 4 hours, the sensitivity and residual vibration change shall not exceed 30% compared with the initial value
7 Strength test of outlet Apply 9.8N pulling force between shell and wire for 30 seconds The wire is not loose or falling off, the product function is normal, and the wire is not damaged
8 Protection level Place the probe in 15cm deep water and soak for 24 hours Take out the capasual from the water and install it on the test board to measure the distance. The probe works normally without long sound.
9 High and low temp characteristic test Keep the temp at -40ºC for 2h,increase to 25ºC and keep for 2h,increase to 85ºC and keep for 2h.  After the test and place in + 25 ºC (room temp) for 2 hours, the sensitivity and residual vibration change shall not exceed 30% compared with the initial value
10 High and low temp working test Under high temp 85 ºC, low temp - 40 ºC, working voltage 140 Vp-p, pulse number 20, continuous working 48 hours Probe works normally (sensitivity and residual vibration are within normal range)
             
             
5.Test conditions and instruments
No. Test item Test instruments/method Test condition
1 resonant frequency Impedance analyzer ambient temperature 25 ± 5 ºC
2 static capacitance LCR bridge measuring instrument ambient temperature 25 ± 5 ºC
3 residual oscillation KT test equipment ambient temperature 25 ± 5 ºC
4 sensitivity KT test equipment 0.8m at room temperature, target Φ 75mm PVC pipe
5 Angle (X & Y axis) KT test board, as per Fig.1 Under normal room temperature, the probe is 500mm from the ground, 500mm from the object to be detected, and the object to be detected is Φ 75mm PVC pipe, 1000mm high. The test environment: 2 meters in front and 1.5m in the left and right without obstacles
6 Maximum allowable input voltage KT test board and Oscilloscope 140vp-p, pulse width 0.5ms,
intermittent: 10ms
7 Mean time between failures aging test rack Test temp 25±5ºC
             
6.Precautions
1. Please confirm with us which industry will be used before purchasing for selection.
2. In order to prevent the sensor from failure, working failure or performance degradation, the anti failure
   function shall be added to the product design, and the product shall not be used under the following or
   similar conditions.
   (a) strong shock or vibration
   (b) prolonged exposure to high temperature and humidity;
   (c)In corrosive gas or sea breeze
   (d)Exposure to dissolved organic matter
   (e)Dusty environment;
   (f)Over allowable input voltage
 
7.Quality assurance
The sensor defects due to the manufacturer during the warranty period of the product can be replaced free of charge.
The following situations are not covered by the warranty.
1, improper use or handling by users. 
2, changed or repaired by the users. 
3,any other situation that does not belong to the responsibility of the manufacturer, such as natural disasters, accidents, etc.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier